Ensure surfaces are free of dust, grease and oil. Best used in temperatures between 10°C and 40°C in a well-ventilated area.
Cut off the tip of the cartridge above the screw thread. Screw on nozzle and cut to desired bead size. Insert into cartridge gun.
Gently squeeze adhesive on to one surface in a zig-zag pattern. Be careful of squeeze out. When working on rough, uneven surfaces, use enough adhesive to fill gaps.
Within 10 minutes, press surfaces together and hold for 20-60 seconds. Heavy items may require temporary support and mechanical fastening.
Remove any excess adhesive immediately with a dry cloth. White spirit may be used according to manufacturer’s instructions.
For First Aid and SDS information, click here.