Even Bonds Underwater
Withstands Extreme Temperatures
Gorilla’s Strongest Grab
5x Stronger than Gorilla Heavy Duty Grab Adhesive
Dries crystal clear for a virtually invisible bond
Indoor / Outdoor
100% waterproof formula which withstands extreme heat and cold.
Flexible formula which fills voids with little or no shrinkage.
All surfaces should be clean and free of dirt, grease, and oil.
Cut off the tip of the cartridge above the screw thread. Screw on nozzle and cut to desired bead size. If using cartridge insert into cartridge gun.
Squeeze Gorilla Heavy Duty Grab Adhesive Crystal Clear on to one surface in a zig-zag pattern. When working on uneven surfaces, use enough adhesive to fill gaps. Best results achieved if applied above 5°C.
Within 30 minutes, press surfaces together and hold for 20-60 seconds. Heavy items may require temporary support and mechanical fastening. Full cure achieved in 24 hours.
Remove excess adhesive from nozzle with a dry cloth. Keep nozzle attached and replace cap tightly to prevent adhesive from curing. Store in a cool, dry place. To re-use product, unscrew nozzle and clean out cured adhesive.
WHAT MAKES GORILLA HEAVY DUTY GRAB ADHESIVE CRYSTAL CLEAR DIFFERENT FROM GORILLA HEAVY DUTY GRAB ADHESIVE?
Gorilla Heavy Duty Grab Adhesive Crystal Clear shares many of the benefits as our original formula, however its 5 x stronger, extra tough and dries crystal clear!
WHAT IS THE TEMPERATURE RANGE FOR GORILLA HEAVY DUTY GRAB ADHESIVE CRYSTAL CLEAR?
Gorilla Heavy Duty Grab Adhesive Crystal Clear can be applied between 10°C to 40°C. Once cured, it can withstand temperatures -40°C to 93°C.
IS GORILLA HEAVY DUTY GRAB ADHESIVE CRYSTAL CLEAR FOOD SAFE?
Gorilla Heavy Duty Construction Adhesive is not recommended for direct or indirect food contact and should not be considered food safe.
HOW DO I REMOVE GORILLA HEAVY DUTY GRAB ADHESIVE CRYSTAL CLEAR FROM MY SURFACE?
To clean surface while adhesive is still wet/uncured, wipe wet adhesive off the project immediately with a dry cloth. Isopropyl alcohol (IPA) may be used according to manufacturer’s instructions. For cured/dried adhesive, mechanical means such as sanding or scraping are necessary.
HOW DO I REMOVE GORILLA HEAVY DUTY GRAB ADHESIVE CRYSTAL CLEAR FROM MY BODY/SKIN?
Wipe off as much adhesive as possible with a dry cloth. When the majority of the adhesive has been removed, wash skin with soap and warm water.
WHAT SHOULD I DO IF I THINK A HUMAN OR ANIMAL HAS INGESTED GORILLA HEAVY DUTY GRAB ADHESIVE CRYSTAL CLEAR?
For medical emergencies, seek medical assistance immediately. Call 999/112 for emergency services. For animal emergencies, contact a vet or animal specialist immediately. Call a member of our product safety team on +44 (0)843 507 1200 and follow the instructions.