
Anti-Clog Cap

Fast Setting

High Strength

Impact Tough

Precise Dispensing
-
Bonds
Metal, wood, ceramic, leather, paper, rubber, plastics, porcelain, stone and more! *
*Not recommended for use on polyethylene or polypropylene plastic or similar materials.
-
Impact-Tough™
Formulated for impact resistance and strength.
-
Precise Dispensing
Precise dispensing tool designed to fit comfortably in the hand.
-
Fast-Setting
Dries in just 10-45 seconds, with no gripping required.†
†Press the two surfaces together for 10-45 seconds.
-
Anti-Clog Cap
Keeps super glue from drying out. It’s Gorilla Tough use after use.
Protect work area from spills. Clean and dry the surfaces to be bonded. To puncture seal on tube, tighten white nozzle firmly.
Apply a small amount of Gorilla Super Glue Micro Precise to one surface. Only one drop per 6.5cm2 recommended.
To dispense, squeeze, the side of the bottle. The harder you squeeze, the more glue will dispense.


Press the two surfaces together between 10-45 seconds.
Set time can vary based on amount of glue and type of surface glued. Excess glue can cause delayed or failed bond. Wait 24 hours for full cure.
FAQs
-
HOW IS GORILLA SUPER GLUE DIFFERENT THAN GORILLA GLUE?
Gorilla Super Glue is a cyanoacrylate adhesive, while Gorilla Glue is a polyurethane. Unlike Gorilla Glue, Gorilla Super Glue does not require extended clamp time or moisture to activate. It does not foam during set up. In addition, Gorilla Super Glue is recommended primarily for indoor applications only and is ideal for smaller repairs that require an instant bond and projects where clamping is not needed.
-
WHAT DOES IMPACT TOUGH MEAN?
Gorilla Super Glue is designed with a reinforced formula to handle bumps and drops with a strong, reliable bond.
-
WILL GORILLA SUPER GLUE BOND PLASTIC/VINYL/RUBBER?
Gorilla Super Glue has been engineered to achieve excellent results on difficult to bond substrates. It is formulated to bond a wide range of similar and dissimilar materials including most plastics, metals, elastomers, wood, and porous surfaces. Gorilla Super Glue requires some absorbed moisture on the bonding surfaces to cure. Certain difficult to bond plastics, such as polyethylene and polypropylene, have little to no moisture and will not form good bonds.
-
HOW DO I REMOVE GORILLA SUPER GLUE FROM BODY/SKIN OR SEPARATE BONDED BODY/SKIN?
To remove Gorilla Super Glue from your skin, soak the bonded area in warm, soapy water. Acetone may also be used according to the solvent manufacturer’s instructions (fingernail polish remover works well). The key is to be patient and NEVER pull the area apart. Gently wiggle the bonded area to allow the soapy water or acetone to penetrate the bond. After soaking, the adhesive should come off easily. Keep in mind that acetone can strip your skin of oils, so apply moisturizer after removal.
-
HOW DO I REMOVE GORILLA SUPER GLUE FROM MY SURFACE?
To remove uncured Gorilla Super Glue, use a towel dampened with acetone or isopropyl alcohol to blot the area. Several applications may be necessary to completely remove the uncured glue. For removal of cured Gorilla Super Glue from the surface of your project, soak bonded area with warm soapy water or acetone. The adhesive should begin to soften, but many applications may be necessary. Keep in mind that isopropyl alcohol and acetone can damage some surface materials, such as countertops and some plastics. Always test in a small, unseen area first.
-
IS GORILLA SUPER GLUE FOOD SAFE?
Gorilla Super Glue is not intended for any application with direct or indirect food contact and should not be stored near food or in the refrigerator. Gorilla Super Glue contains no solvents, but has a strong odour. To avoid irritation, use in areas that have adequate air movement and ventilation.
-
WHAT SHOULD I DO IF I THINK A HUMAN OR ANIMAL INGESTED GORILLA SUPER GLUE?
For medical emergencies, seek medical assistance immediately. Call 999/112 for emergency services. For animal emergencies, contact a vet or animal specialist immediately.
You may also like…
-
Gorilla Tape – Crystal Clear
The tough tape that combines high strength with ultimate clarity.
The tough tape that combines high strength with ultimate clarity.
-
Gorilla Super Glue Brush & Nozzle
Two ways to dispense for control and accuracy.
Two ways to dispense for control and accuracy.
-
Gorilla Super Glue
Tough, fast setting and Impact Tough.
Tough, fast setting and Impact Tough.
-
Gorilla Super Glue Gel
Tough, fast setting, no-run formula.
Tough, fast setting, no-run formula.