Gorilla Waterproof Coat & Seal White

A flexible, rubberized coating that seals out water, air and moisture.

This product is currently out of stock and unavailable.

SKU: N/A Category: Tags: , , ,

Gorilla® Waterproof Coat & Seal is a flexible, rubberised coating that seals out water, air and moisture. Perfect for repairing leaks, the liquid is easy to apply – you simply brush it, roll it or pour it.

 

The self-levelling formula seals and protects by smoothly covering small gaps and cracks to create a weatherproof, watertight seal.

 

Great for: conservatories, windows, uPVC, caravans, roofing, gutters, drainage pipes, external chimneys.

GB SAFETY DATA SHEETS

Buy now:

Amazon


Flexible



Self-Levelling



Weatherproof



Works in Extreme Temperatures



Works on Wet and Dry Surfaces

Works in Extreme Conditions

Withstands wet, dry, hot or cold conditions.

 

Airtight and Watertight

Perfect for repairing leaks and covering small gaps.

 

Works on Wet and Dry Surfaces

Can be used indoors and outdoors.

 

Flexible and Self-Levelling

Can be brushed, rolled or poured.



How to use
PREPARE

Ensure surface is clean and free from dust, grease and oil.


1. STIR

Stir contents for 30 seconds until it is thoroughly mixed.


2. APPLY

Apply to surface by brush, roll, trowel or simply by pouring. Apply between 10°C and 48°C. Do not use for gaps larger than 6mm. Ensure surface is completely covered. Wipe up any unwanted material with a dry cloth or paper towel immediately. Full cure in 24-48 hours.

 

Note: Multiple coats can be applied to ensure all cracks and holes have been filled. Test finished project with light water exposure to ensure all cracks have been filled. If test fails, apply additional coats. Allow to cure between coats and before water exposure. To achieve a watertight seal, surfaces must be non-porous.


STORAGE

Use mineral spirits to clean applicators such as brushes and rollers. Wipe excess product from top edge of tin with a dry cloth. Firmly press lid shut to create tight seal around the tin. Store away from children and animals.


FAQs

How do I remove Gorilla Waterproof Coat & Seal from my surface?

This material will be difficult to remove from a surface. For wet material, immediately wipe with a dry cloth or paper towel. For cured material, a solvent may soften the material but could damage the surface around/underneath. Gently cut or scrape the material to try and remove. A textured surface will be much harder to clean than a smooth one. Use mineral spirits to clean applicators such as brushes and rollers.

 

How do I remove Gorilla Waterproof Coat & Seal from my body or skin?

We strongly recommend wearing gloves while working on any project using Gorilla Waterproof Coat & Seal. If you do get it on your skin, try wiping it off with a dry cloth or paper towel. For cured material, try washing with soapy water to loosen the coating. Dry your skin and apply lotion. We do not recommend using any kind of alcohol, acetone, or other solvent on the skin. If irritation occurs seek medical advice and have product container or label at hand.

 

Is Gorilla Waterproof Coat & Seal food safe?

This product is not recommended for direct or indirect food contact.

 

What is the approximate shelf life of Gorilla Waterproof Coat & Seal?

The approximate shelf life of Gorilla Waterproof Coat & Seal is up to 2 years, unopened from date of manufacture. Once opened it will be dependent on storage conditions and age of the product.

 

What is the temperature range of Gorilla Waterproof Coat & Seal?

Gorilla Waterproof Coat & Seal can be applied between 10°C and 48°C. Once cured, it can withstand temperatures between -40°C and 100°C.

 

What’s the best way to prepare product for use?

Stir contents for 30 seconds until it is thoroughly mixed. After first use, slight skinning may occur. If this occurs, remove the layer and stir contents for 30 seconds.

 

Are Gorilla Glue products tested on animals?

We believe strongly in the inherent rights of animals. Therefore, The Gorilla Glue Company does not perform any kind of animal testing.

 

What should I do if I think a human or animal has ingested Gorilla Waterproof Coat & Seal?

For medical emergencies, seek medical assistance immediately. Call 999/112 for emergency services. For animal emergencies, contact a vet or animal specialist immediately. Refer to SDS for more information and have product label to hand.



You may also like…