VIDEO

GorillaWeld

The heavy-weight epoxy with a titanium bond.

This product is currently out of stock and unavailable.

SKU: N/A Category: Tag:

GorillaWeld is an incredibly strong, heavy duty two part adhesive. The tough, titanium bond epoxy formula handles up to 4250 PSI (298 kg/cm²) and sets in just 10 minutes.

GorillaWeld is waterproof and versatile, creating a long lasting, permanent bond to: metal, plastics*, concrete, ceramics, PVC, fibreglass and more! Once cured, you can tap, file, sand and drill it!

* Not recommended for use polyethylene or polypropylene plastics.

SAFETY DATA SHEETS


Incredibly Strong Bond



Sets In 10 Mins



Waterproof



Bond Withstands Extreme Temperatures*



Gap Filling

*Application Temperature 0°C to 32°C Cured Temperature -40°C to 147°C

  • Ultra-tough

Quite simply, this is our strongest epoxy yet.

  • Bonds

Metal, plastics, concrete, ceramics, PVC, fibreglass and more!

  • Easy to use

Just dispense, mix and apply.

  • Sets in 10 minutes

Fast setting formula dries a dark grey

  • Waterproof*

Waterproof adhesive holds up indoors & out!

* Bonded wood materials should not be submerged or soaked in water

  • Adaptable

Can be tapped, filed, sanded and drilled once cured.



How to use
1. PREPARE

Remove cap from each tube and use top of cap to puncture foil seal.


2. DISPENSE

Dispense equal parts from each tube onto a clean, disposable surface. Mix with disposable mixing tool provided for approximately 20 seconds until colour is uniform.


3. APPLY

Apply to surface within 3 minutes. Grip surfaces together and leave undisturbed for 10 to 30 minutes. Full cure in 24 hours. Cure time dependant on temperature, humidity and quantity applied.


4. CLEAN UP / STORAGE

After use, replace cap tightly on each tube. Store in a cool, dry place.


FAQs

  • WHAT IS TEMPERATURE RANGE FOR GORILLAWELD?

Gorilla Weld can be applied between 0°C to 32°C. Once cured GorillaWeld will hold strong between -40°C to 147°C.

  • WILL GORILLAWELD BOND PLASTIC/VINYL/RUBBER?

Gorilla Weld will work well on many types of plastic; however, we do not recommend for use on polypropylene (PP), polyethylene (PE) or similar plastics, or any type of rubber with high oil or plasticizer content.

  • WHAT DOES GORILLAWELD WORK BEST FOR?

GorillaWeld is ideal for metal and plastic (see above) substrates. GorillaWeld does not sag so it is ideal for vertical surfaces

  • HOW SHOULD GORILLAWELD BE STORED?

GorillaWeld should be stored in a cool, dry place. Store away from children and animals.

  • HOW DO I MIX GORILLAWELD?

GorillaWeld should be mixed 1:1 for 20 seconds or until uniform prior to application.

  • DOES GORILLAWELD BECOME HOT DURING CURE?

Yes, mixing the hardener and resin together creates an exothermic reaction and will generate heat during cure. Use a suitable missing vessel that is unlikely to be impacted by heat.

  • HOW LONG DO I HAVE BEFORE GORILLAWELD BEGINS TO HARDEN?

GorillaWeld will begin to harden after 3 minutes. Adhesive should be applied prior.

  • WHAT SURFACES WILL GORILLAWELD BOND TO?

GorillaWeld is particularly suited for metal, plastic and other rigid surface bonding.

  • IS GORILLAWELD FOOD SAFE?

GorillaWeld is not recommended for direct or indirect food contact and should not be considered food safe.

  • WHY IS GORILLAWELD ODOUR SO STRONG?

GorillaWeld is based on methyl methacrylate chemistry which has a naturally strong odour. We suggest using in well ventilated area.

  • HOW DO I REMOVE GORILLAWELD FROM BODY/SKIN?

Uncured: GorillaWeld can be harmful through skin absorption and it is strongly recommended that you wear gloves during use. If GorillaWeld is on skin, try removing with a dry cloth or paper towel and then wash area thoroughly with soap and water.

Cured: Cured material can be rolled off skin. Remove as much cured material as possible and wash area thoroughly with soap and water.

For medical emergencies, call +44 (0)843 507 120 anytime to reach a member of our product safety team.

  • HOW DO I REMOVE GORILLAWELD FROM MY SURFACE?

Uncured: Wipe up as much material as possible with a dry cloth and clean any remaining product/residue with Isopropyl alcohol (IPA) or acetone following solvent manufacturer’s instructions.

Cured: For removing cured/dried GorillaWeld, mechanical means such as sanding or chiseling.

  • WHAT SHOULD I DO IF I THINK A HUMAN OR ANIMAL HAS INGESTED GORILLAWELD?

For medical emergencies, call +44 (0)843 507 1200 anytime to reach a member of our product safety team.







Related products

You may also like…