Find a

Change Location

Gorilla Heavy Duty Grab Adhesive

Grabs virtually anything with ultra-high strength.

Gorilla Grab Adhesive is so versatile, it grabs virtually anything. The 100% adhesive formula provides a long-lasting, heavy duty bond. It’s flexible, gap filling and withstands extreme temperatures. Use it indoors or outdoors, even underwater, for an extra-tough bond that’ll last.


Ultra-High Strength

Fast Grab


Gap Filling

Withstands Extreme Temperatures

Indoor / Outdoor

Even Bonds Underwater


  • Indoor / Outdoor

    100% waterproof formula works indoors and out – even underwater.

  • Temperature resistant

    Withstands extreme heat and cold.

    Application Temperature 4°C to 37°C

    Cured Temperature -40°C to 93°C

  • Gap filling

    Fills voids with little or no shrinkage.

  • Easy to use

    Flexible and paintable.

How to use

1. Prepare

Cut off the tip of the cartridge above the screw thread. Screw on nozzle and cut the desired bead size. Insert into cartridge gun.

2. Apply

Gently squeeze adhesive on to one surface in a zig-zag pattern. Be careful of squeeze-out. When working on rough, uneven surfaces, use enough adhesive to fill gaps.

2. Apply
3. Grip
3. Grip

Within 10 minutes, press surfaces together and hold for 20-60 seconds. Heavy items may require temporary support and mechanical fastening.

  • What is the best way to prepare surfaces for bonding?

    Surfaces should be clean and free of debris, grease, and oil. Surfaces can be damp.

  • What is the best way to store Gorilla Grab Adhesive?

    Gorilla Grab Adhesive is best if stored in a cool, dry location, with the nozzle attached filled with adhesive. The left over adhesive in the nozzle acts as a seal for the adhesive in the cartridge.

  • What makes Gorilla Grab Adhesive different from ordinary construction adhesives?

    Gorilla Heavy Duty Grab Adhesive is 100% adhesive and doesn’t contain water or solvents, unlike some grab adhesives. This provides a long-lasting, heavy-duty bond that won’t crack over time. Other construction adhesives on the market can contain water or solvents, which results in shrinking and a weaker bond. Another difference is versatility – a wide variety of uses with one product and few restrictions.

  • What is the temperature range for Gorilla Grab Adhesive?

    Gorilla Grab Adhesive can be applied between 4°C to 37°C. Once cured, it holds strong between -40°C to 93°C.

  • Will Gorilla Grab Adhesive bond plastic/vinyl/rubber?

    Gorilla Heavy Duty Grab Adhesive is a tough and versatile adhesive. Its hybrid chemistry is formulated to bond a wide range of similar and dissimilar materials including most plastics, metals, elastomers, wood, and porous surfaces. Certain difficult to bond plastics, such as polyethylene (PE) and polypropylene (PP), or certain types of rubber with high oil or plasticizer content will not form good bonds.

  • What is the best way to open the Gorilla Grab Adhesive cartridge?

    1. Unscrew and remove the nozzle.
    2. Cut the tip of the cartridge using a knife or scissors at the top of the threads. (Do not puncture the tip).
    3. Replace the nozzle.
    4. Cut the tip of the nozzle to the desired bead size, using the marking on the nozzle as a guide.

  • Is Gorilla Grab Adhesive food safe?

    Gorilla Heavy Duty Construction Adhesive is not recommended for direct or indirect food contact and should not be considered food safe.

  • How do I remove Gorilla Grab Adhesive from my surface?

    To clean surface while adhesive is still wet/uncured, wipe wet adhesive off the project immediately with a dry cloth. Isopropyl alcohol (IPA) may be used according to manufacturer’s instructions. For cured/dried adhesive, mechanical means such as sanding or scraping are necessary.

  • How do I remove Gorilla Grab Adhesive from my body/skin?

    Wipe off as much adhesive as possible with a dry cloth. When the majority of the adhesive has been removed, wash skin with soap and warm water.

  • What should I do if I think a human or animal has ingested Gorilla Heavy Duty Grab Adhesive?

    For medical emergencies, call +44 (0)843 507 1200 anytime to reach a member of our product safety team.