4. Clean up / Storage
Clean up while glue is wet: Use a clean, damp cloth to wipe off excess glue. Make as many passes as needed with the clean area of the cloth to remove all the glue. When areas have completely dried, sand as needed. Wash hands, skin and damp cloths in soap and warm water, then rinse.
Clean up when glue has dried: Use a sharp putty knife, razor, or sharp scraper to shave hardened glue from surface, then sand as needed. Soak hands and skin in soap and warm water, wash, then rinse.
Cleaning the bottle tip: Use a clean, damp cloth to wipe off excess glue after closing. If tip becomes clogged with dry glue, remove the cap and push the clog backwards with a toothpick, then rinse cap with warm water.
To remove Gorilla Wood Glue from hands, wash with warm soap and water.
Application temperature should be above 13˚C. Before finishing, sand surfaces to minimise glue exposure. Not recommended for structural or load-bearing applications, or for continuous submersion or below-waterline use.
Close cap after use. Store at room temperature (do not freeze). If the glue thickens or separates, shake vigorously until the original consistency is restored.