Gorilla Heavy Duty Grab Adhesive

Grabs virtually anything with ultra-high strength.

This product is currently out of stock and unavailable.

SKU: N/A Category: Tags: , , ,

Gorilla Grab Adhesive is so versatile, it grabs virtually anything. The flexible, gap filling formula provides a heavy duty bond that’ll last.

Gorilla Grab Adhesive is 100% waterproof and withstands extreme temperatures, meaning you can use it indoors or out, for an extra-tough bond.

SAFETY DATA SHEETS

Buy now:

Amazon
B&Q
Wilko
Screwfix
Toolstation
Wickes


Ultra-High Strength



Fast Grab



Gap Filling



Withstands Extreme Temperatures



Even Bonds Underwater

Easy to Use

Flexible, fast grab formula which bonds virtually anything.

 

Ultra-High Strength

Provides a long-lasting heavy duty bond

 

Indoor / Outdoor

100% water formula which withstands extreme heat and cold.

 

Gap Filling

Fills voids with little or no shrinkage.



How to use
PREPARATION

All surfaces must be clean.


1. LOAD

Cut off the tip of the cartridge above the screw thread. Screw on nozzle and cut the desired bead size. Insert into cartridge gun.


2. APPLY

Squeeze adhesive on to one surface in a zig-zag pattern. When working on uneven surfaces, use enough adhesive to fill gaps. Best results achieved if applied above 5°C.


3. PRESS

Within 5 minutes, press surfaces together and hold for 20-60 seconds. Heavy items may require temporary support and mechanical fastening.

Full cure achieved in 24 hours.


FAQs

WHAT IS THE BEST WAY TO PREPARE SURFACES FOR BONDING?

Surfaces should be clean and free of debris, grease, and oil. Surfaces can be damp.

 

WHAT MAKES GORILLA GRAB ADHESIVE DIFFERENT FROM ORDINARY GRAB ADHESIVES?

Gorilla Heavy Duty Grab Adhesive is 100% adhesive and doesn’t contain water or solvents, unlike some grab adhesives which may shrink over time and provide a weaker bond. Being 100% adhesive, our Grab Adhesive provides a long-lasting, heavy-duty bond that won’t crack over time. Another difference is versatility – Gorilla Heavy Duty Grab Adhesive can be used indoors and out, offering a wide range of applications.

 

IS GORILLA HEAVY DUTY GRAB ADHESIVE REPOSITIONABLE?

Gorilla Heavy Duty Grab Adhesive has an open working time of up to 10 minutes, which allows more flexibility when finding the right position.

 

WHAT IS THE TEMPERATURE RANGE FOR GORILLA HEAVY DUTY GRAB ADHESIVE?

Gorilla Heavy Duty Grab Adhesive can be applied between 4°C to 37°C. Once cured, it holds strong between -40°C to 93°C.

 

WILL GORILLA HEAVY DUTY GRAB ADHESIVE BOND PLASTIC/ RUBBER?

Gorilla Heavy Duty Grab Adhesive will work well on many types of plastic; however, we do not recommend for use on polypropylene (PP) or polyethylene (PE) plastics or any type of rubber with high oil or plasticizer content. If you would like more information on how Gorilla Heavy Duty Grab Adhesive bonds to specific substrates, please contact our technical team via the ‘Contact Us’ section on the website for assistance.

 

WHAT IS THE APPROXIMATE SHELF LIFE OF GORILLA HEAVY DUTY GRAB ADHESIVE?

The approximate shelf life of Gorilla Heavy Duty Grab Adhesive is up to 2 years, unopened from date of manufacture. Once opened there is no standard time, it will be dependent on storage conditions and age of the product, up to 6/9 months is a good guideline. For optimum longevity of your Gorilla Heavy Duty Grab Adhesive, store in a cool, dry location, with the nozzle attached. Any left-over adhesive in the nozzle acts as a seal for the adhesive in the cartridge. Remove nozzle and clean out any cured adhesive prior to next use.

 

IS GORILLA HEAVY DUTY GRAB ADHESIVE FOOD SAFE?

Gorilla Glue products are not recommended for direct or indirect food contact and should not be considered food safe.

 

HOW DO I REMOVE GORILLA HEAVY DUTY GRAB ADHESIVE FROM MY SURFACE?

To clean surface while adhesive is still wet/uncured, wipe wet adhesive off the project immediately with a dry cloth. Isopropyl alcohol (IPA) may be used according to manufacturer’s instructions. For cured/dried adhesive, mechanical means such as sanding or scraping are necessary.

 

HOW DO I REMOVE GORILLA HEAVY DUTY GRAB ADHESIVE FROM MY SKIN?

Wipe off as much adhesive as possible with a dry cloth. When the majority of the adhesive has been removed, wash skin thoroughly with soap and warm water.

 

WHAT SHOULD I DO IF I THINK A HUMAN OR ANIMAL HAS INGESTED GORILLA HEAVY DUTY GRAB ADHESIVE?

For medical emergencies, seek medical assistance immediately. Call 999/112 for emergency services. For animal emergencies, contact a vet or animal specialist immediately.

 



You may also like…