#WHICH SPRAY PATTERN SHOULD I EXPECT DURING NORMAL USE? / +When the nozzle is pressed firmly, the product will dispense in a web spray pattern – this is the intended method of application and helps ensure even, controlled coverage for optimal performance. A lighter press on the nozzle may result in a narrower, more jet-like spray pattern, which is less consistent and not the intended method of application.

#HOW DO I REMOVE GORILLA CONTACT ADHESIVE SPRAY FROM MY SURFACE? / +If the adhesive is still wet/uncured, wipe with a dry cloth and clean with isopropyl alcohol. If the adhesive has dried/cured, gently scrape the surface to remove. Be careful not to damage the surface underneath.

#HOW DO I REMOVE GORILLA CONTACT ADHESIVE SPRAY FROM MY BODY OR SKIN? / +If the adhesive is still wet/uncured, wipe with a dry cloth, then wash the affected area with soap and water. If the adhesive had dried/cured, rinse well with water.

#WHAT IS THE TEMPERATURE RANGE OF GORILLA CONTACT ADHESIVE SPRAY? / +Gorilla Contact Adhesive Spray can be applied between 10°C to 32°C (50°F to 90°F). Once cured Gorilla Contact Adhesive Spray can hold strong between 0°C to 82°C (32°F to 180°F).

#WHAT MATERIALS CAN GORILLA CONTACT ADHESIVE WEB SPRAY BE USED ON? / +Gorilla Contact Adhesive Spray will work well on a variety of surfaces, including carpet tiles, laminates, fabric, wood, leather and more. It will work on upholstery and large surface applications. This product is not recommended for carpet laying and cannot be used for mounting weighted materials.

#WHAT IS THE BEST WAY TO HOLD THE CAN DURING APPLICATION? / +For best results, hold the can upright during application. Spraying at an angle may affect the spray pattern and coverage. Overlap the product to ensure consistent coverage across the desired surface. Please note the clarity of the formula may reduce with overlapping.

#WHEN APPLYING, SHOULD GORILLA CONTACT ADHESIVE WEB SPRAY FEEL TACKY BEFORE BONDING? / +Bond strength will increase with a longer tack time. For best results, allow the adhesive to partially dry for approximately 1 minute before positioning surfaces together. For Maximum Bond Strength: Spray both surfaces to be joined with multiple coats of adhesive and allow to dry for approximately 1-2 minutes until the adhesive becomes tacky. Bond surfaces together, applying firm pressure when joining. Please note that a thicker coating may result in loss of clarity.

#DO I NEED TO APPLY GORILLA CONTACT ADHESIVE SPRAY ON BOTH SURFACES? / +For Maximum Bond Strength we would recommend spraying both surfaces to be joined with multiple coats of adhesive and allow to dry for approximately 1-2 minutes until the adhesive becomes tacky. Bond surfaces together, applying firm pressure when joining.

#DOES GORILLA CONTACT ADHESIVE WEB SPRAY DRY COMPLETELY CLEAR? / +Although Gorilla Contact Adhesive Spray is designed to dry crystal clear, it may not always appear completely transparent. Applying multiple layers or a thicker/heavier coating may affect clarity. For best results, we recommend overlapping the product when spraying, to ensure an accurate, even coating.

#WHAT IS THE DIFFERENCE BETWEEN GORILLA CONTACT ADHESIVE SPRAY AND GORILLA CONTACT ADHESIVE TUBE? / +Both products are designed to create a strong, permanent bond upon contact, but they are suited to different application methods. Gorilla Contact Adhesive Tube is ideal for smaller, more precise applications where the adhesive can be applied directly to the required area. Gorilla Contact Adhesive Web Spray is designed for faster coverage of larger surface areas, providing an even spray application that can be particularly useful for materials such as fabric, foam, laminates and other large surfaces. Gorilla Contact Adhesive Spray is not repositionable, whereas Gorilla contact adhesive can be repositioned for a short period (up to 4 minutes).

#WHAT IS THE DIFFERENCE BETWEEN GORILLA CONTACT ADHESIVE SPRAY AND GORILLA COAT & SEAL SPRAY? / +Although both products come in a spray format, they are designed for very different applications. Gorilla Contact Adhesive Spray is an adhesive, designed to bond surfaces together, providing a fast, even adhesive coverage for large applications. Gorilla Waterproof Coat & Seal Spray is a coating product, designed to seal small gaps/cracks and protect surfaces, creating a flexible, waterproof barrier against water, air and moisture.

#CAN GORILLA CONTACT ADHESIVE SPRAY BE USED ON FOAM? / +Yes, Gorilla Contact Adhesive Spray can be used on foam, however we would not recommend its use on polystyrene foam and unsupported vinyl.

#CAN GORILLA CONTACT ADHESIVE SPRAY BE USED ON VEHICLES? / +Gorilla Contact Adhesive Spray can be used for internal decorative use on vehicles, for example renovations and repairs to upholstery etc. It cannot be used near the engine or under the bonnet.

#IS GORILLA CONTACT ADHESIVE SPRAY WATERPROOF? / +Gorilla Contact Adhesive Spray has water resistant properties and can be used on outdoor applications with moderate exposure to water, such as rain showers. However, the product is not waterproof and it cannot withstand being submerged or exposed to water for long periods of time.

#WHAT SHOULD I DO IF I THINK A HUMAN OR ANIMAL INGESTED GORILLA CONTACT ADHESIVE SPRAY? / +For medical emergencies, seek medical assistance immediately. Call 999/112 for emergency services. For animal emergencies, contact a vet or animal specialist immediately. Warning and hazard information, including the Unique Formula Identifier (UFI), for Poison Centres, can be found on product packaging and in the product Safety Data Sheet (SDS).

‍