#IS GORILLA GLUE CLEAR WATERPROOF? / +Gorilla Glue Clear is water resistant, and can withstand intermittent exposures, however is not intended to be submerged in water. Gorilla Glue Original is 100% waterproof and can withstand soaking and longer term water exposure, assuming the materials being are not significantly affected by the water.

#Do I need to add moisture before applying Gorilla Glue clear, can I skip this step? / +For non-porous surfaces only (i.e. metal, glass, plastic), lightly dampen one surface with water. Do not saturate the surface or add water to bottle. For best results follow the pack directions ‘Damp It, Glue It, Grip It’ – apply a small amount of moisture to one surface, then apply glue to the dry surface and clamp.

#Why do I need to clamp the surfaces together, can I skip this step? / +Gorilla Glue Clear is not a fast-acting adhesive and requires the surfaces to be mechanically clamped (with either Clamps, Gorilla Tape or Weights) for a minimum of two hours whilst the glue cures – for best results leave clamped overnight. If you are unable to clamp your project Gorilla Glue Clear might not be the correct adhesive to use, please contact our technical team via the ‘Contact Us’ section on the website for assistance.

#What is the approximate shelf life of Gorilla Glue Clear? / +The approximate shelf life of Gorilla Glue Clear is up to 2 years, unopened from date of manufacture. Once opened it will be dependent on storage conditions and age of the product, up to 6/9 months is a good guideline.

#HOW DO I MAXIMISE THE SHELF LIFE OF GORILLA GLUE CLEAR? / +After each use, wipe nozzle clean with a dry cloth and tightly replace lid. Store in cool, dry place with exposure to light. Lack of light and heat can cause product to yellow.

#How do I remove Gorilla Glue Clear from my work surface? / +Work surfaces must be protected prior to application. Always wear gloves. If you need to remove uncured/wet glue, we recommend wiping with a dry cloth or a cloth soaked in isopropyl alcohol. Once Gorilla Glue Clear is dry, it can only be removed by mechanical means: such as sanding, chiselling, scraping or picking.

#How do I remove Gorilla Glue Clear from my body or skin? / +It is strongly recommended that gloves are worn during application. If you do get Gorilla Glue Clear on your skin, try removing it with a dry cloth (particularly if the glue is still tacky). If that doesn’t work, try washing off the glue with soap and cold water. If irritation occurs seek medical advice and have product container or label at hand.

#WHAT IS THE TEMPERATURE RANGE FOR GORILLA GLUE CLEAR? / +Gorilla Glue Clear can be applied between 0°C to 40°C. Once cured Gorilla Glue can hold strong between -30°C to 90°C.

#Will Gorilla Glue Clear Bond Plastic or Rubber? / +Gorilla Glue Clear will work well on many types of plastic; however, we do not recommend for use on polypropylene (PP) or polyethylene (PE) plastics or any type of rubber with high oil or plasticizer content. If you would like more information on how Gorilla Glue Clear bonds to specific substrates, please contact our technical team via the ‘Contact Us’ section on the website for assistance.

#WHAT SHOULD I DO IF I THINK A HUMAN OR ANIMAL HAS INGESTED GORILLA GLUE CLEAR? / +For medical emergencies, seek medical assistance immediately. Call 999 for emergency services. For animal emergencies, contact a vet or animal specialist immediately.